echidnaEchidna D3HS Rocksaw Specification

Printed:22-Nov-2024 Specification may change without notice.

D3HS

D3HS Series Features

Automatic Blade Brake✔
Reversible Blade Spin Direction✔
Through-hub Water Distribution✔
Case drain required✔
Minimum Trench Width480 mm
Cutting Depth Loss120 mm
 cutting dimensions

Specification

Model


Saw ModelD3HS/NMD3HS/NBD3HS/RB
Excavator rangetonnes5 - 125 - 125 - 16
Blade Diameter Rangemm400 - 1200400 - 1400400 - 1400
Mass (drive unit)kg155155240
Performance


Torque MaxNm320360430
Speed Maxrpm312027802310
Power MaxkW100100100
Input ratings


Flow Maxlpm250250250
Back Pressure Max.MPa000
Pressure MaxMPa483230
Relief Valve Pressure (factory setting)MPa252525
 


echidnaEchidna D3HS Rocksaw Specification
	

	Printed:22-Nov-2024 Specification may change without notice.
	
Recommended Flow Rates for D3HS






Rock Saw ModelDiamond Blade diameter /mm



400
600
800
1000
1200
1400



Recommended Flow Rate (lpm



D3HS/NM
135 - 247
90 - 165
67 - 124
54 - 99
45 - 82




D3HS/NB
152 - 250
101 - 185
76 - 139
61 - 111
51 - 93
43 - 79




D3HS/RB
182 - 250
121 - 222
91 - 167
73 - 133
61 - 111
52 - 95



Recommended flow rate for each saw varies depending on the material to be cut.
			
The table above indicates the working range of the saw with the diamond and wood saw blades having the diameters indicated. 
		
This table does not apply to other blade types.
		
Contact your supplier for more specific recommendations for the material that you want to cut.



D3HS / 

 


echidnaEchidna D3HS Rocksaw Specification
	

	Printed:22-Nov-2024 Specification may change without notice.
	
Hydraulic Connections
D3HS / 

Power port1" bspp
Case Drain1/2" bspp
Signal Port(s)1/4" BSPP


 


echidnaEchidna D3HS Rocksaw Specification
	

	Printed:22-Nov-2024 Specification may change without notice.
	
Blade Mounting Dimensions
D3HS / 
	

	
Centre Spigot/ Hub Diameter * /mm
				Standard60

					
	
	

	
Range available25-100

	
	
Blade Fastening Screws **
 
	
Screw SizeM12 x 25
		
	
	
PCD170mm
Qtyblades < = 1800mm (72")6

			
blades >  1800mm (72")12
	

	



Notes


*Blade Centre Spigot / Hub


Blade centre hubs are removable and can be replaced to provide for different blade centre holes. 

Special blade centre disks can be ordered to accommodate other blade dimensions. 

Changing the blade centring disk does not effect the location and dimensions of the blade fixing screws.


** Blade Screws


Use only high-tensile (10.9 or 12.9) screws for attaching the blade

 
 
Unused screw holes should be plugged with grub screws


For flush cutting, countersink screws are required and the countersinks in the blade must be sufficiently deep to avoid damage to the exposed face of the screws.

If the blade is too thin to accomodate the head of the screw, spacer plates are available and must be used.